For a proper operation of the SW-P-08 router control it is necessary to configure the following values in the router. Please ensure, that these values are properly configured:
-
IP
-
Port
-
Matrix Number
-
Level Number
-
Use Extended Messaging
In addition, these values should be configured when neccessary:
-
Level To Use
-
Level To Switch
One has to choose either Matrix or Level operation as some router vendors do not support a mixed matrix- and level operation.
It also could cose problems on some routers, when “Use Level OR Use Matrix” ni not set to “Use Matrix”. Additionally, The Level/Matrix switch should be set to 1 (instead of 0).