Command

A command is a single action necessary for a recording job. A typical recording job consists of a sequence of a switch and a recording command. Additional commands like the starting of workflows are also possible.

Everything needed for execution is stored in the command.

As commands are only used for the execution in VidiControl there is no representation for them in VidiCore.

Properties

Property	Possible Values	Example	Description	Writeable?
id	string	VCR-0B	External ID of the Command.	Read only (Created by VidiControl).
capabilityId	string	VCR-pY	Capability which should be executed (e.g. switch capability of router)	Read and Write.
poolId	string	VCR-GD	External ID of the pool the device that executes the command must be assigned to. If a device is needed to execute the command either this or deviceId must be set.	Read and Write.
deviceId	string	VCR-2n	External ID of the device that will execute the command. If a device is needed to execute the command either this or poolId must be set.	Read and Write.
executionTime	string (DateTime using the universal sortable date/time pattern)	2023-01-06T14:04:44.799Z	The planned execution time of this command. This must be set for recording commands. For other commands it is calculated in a manner that ensures everything is ready for the recording when it starts.	In general Read and Write. Depending on the type of command and the other commands of the Chunk, some execution times are overwritten with calculated values.
duration	long >= 0 If null, 0 is assumed.	3600	Execution duration of the command in seconds. This is used to plan the execution time of the commands around e.g. the recording command, block devices etc.	Read and Write.
index	long	1	Position of this command in the chain of commands. This is relevant for the calculation of command execution times.	Read and Write.
executionState	string (“Pending”, “InProgress”, “Done”, “Error”, “Virtual”, “DoneWithErrors”, “Preliminary”, “BeforeStart”)	Pending	Current status of the command	Read only.
handling	string (“WaitForResult” or “FireAndForget”)	FireAndForget	Defines how the command execution is handled regarding to the following commands. This has consequences for the calculation of the other commands' execution times. WaitForResult: The following commands are started after this command is finished at the earliest. FireAndForget: The following commands can be started directly after this command is started.	Read and Write.
content	string (JSON)	JSON `{ "action":"Record", "input": { "targetPath":"path", "profileName":"profile01" } }`	The action and action specific information needed for the execution of the command. As the actions are very diverse, their parameters are too. This is represented by using an action specific structure in the input field.	Read and Write.
commandType	string (“Workflow”, “CapabilityRecorder”, “CapabilityRouter”, “CapabilityUnknown”)	CapabilityRecorder	The higher level command type. A command type can include multiple actions and capabilities. Depending on this, VidiControl behaves slightly different regarding content format evaluation, device utilization etc. This should fit the action and capability of the command in any case. Otherwise unwanted behavior cannot be ruled out.	Read and Write.
inPortId	string	VCR-aN	Meaning differs regarding to the command type: Router-Command: In-port for the router switch Recorder-Command: In-port of the router switch used for the recording command, set by VidiControl automatically	Router-Command: Read and Write Recorder-Command: Read only.
outPortId	string	VCR-8l	If the command is a router command, this represents the out-port for the router switch. This field is calculated by VidiControl.	Read only.
routingList	List of Routing objects	CODE `[ { "id": "zp", "start": "2023-02-22T09:02:58.033899Z", "end": null, "inPortId": 2, "outPortId": 100 } ]`	If there were routing changes during a recording, the information regarding these are returned here	Read only.

Example JSON Snippet

JSON

{
  "id": "VCR-9Qa",
  "capabilityId": "VCR-wl",
  "poolId": null,
  "deviceId": "VCR-28J",
  "executionTime": "2023-02-14T08:19:56.251734Z",
  "duration": 2000,
  "index": 0,
  "executionState": "Pending",
  "handling": "WaitForResult",
  "content": "{\"action\":\"Record\",\"input\":{}}",
  "commandType": "CapabilityRecorder",
  "inPortId": "VCR-pY",
  "outPortId": null,
  "routingList":
  [
    {
      "id": "VCR-8V99",
      "start": "2023-02-14T08:19:56.251734Z",
      "end": "2023-02-14T08:20:56.251734Z",
      "inPortId": "VCR-g0",
      "outPortId": "VCR-x8d"
    },
    {
      "id": "VCR-5e9N",
      "start": "2023-02-14T08:20:56.251734Z",
      "end": null,
      "inPortId": "VCR-xd",
      "outPortId": "VCR-x8d"
    }
  ]
}